Condensate Slurry Submersible Water Sump High Pressure Dredging Centrifugal Self Priming Pump

• Overview
• Product Description
• Product Parameters
• Company Profile
• Certifications
• Packaging & Shipping
• FAQ

Basic Info.

Product Description

Overview

The FJX evaporation crystallization circulating pump is a large flow low head axial flow pumpsuitable for evaporation and concentration in industries such as diaphragn caustic soda,phos-phate fertilizer,alumina,Qinbai powder,chlorinated calcium,calcium chloride sugar,salt,pa-permaking,wastewater,etc.

Structural characteristics

Good anti cavitation performance:suitable for low liquid level evaporators,greatly reducing in-vestment in evaporation plants.It is also suitable for new evaporators equipped with high fluidresistance heating chambers on the pump inlet side(reverse circulatian evaporators,double heat-ing chamber series evaporators). High pump efficiency and wide efficiency zone:By changing the installation angle of the bladesand changing the speed,it can meet the user's requirements for flow and head,and ensure thatthe operating conditions of the pump are within the pump efficiency zone,with significant ener-gy-saving effects. Slow speed type:The pump runs smoothly;Light wear and long service life of overcurrent compo-nents;Low crystal damage,suitable for evaporative crystallization process canti lever rotor:Conpared with double support type,the number of shaft seals is reduced by half,the pump weightis light,the overall size is small,and maintenance is convenient.Pump body center support:Compared to the pump body foot support type,the rotor is thermally neutral.Rear door structure:Without disassembling the inlet and outlet flanges of the punp body,the rotor can be extracted,making maintenance convenient and fast.Advanced shaft seal:using containerized machine seal,with a lifespan of 6-12 months;Seal with a new type of liquid blocking packing,with a packinglife of 3-6 months.Evaporator without expansion joint:can be used as an elastic pump base or asuspended punp,with reliable thermal compensation and reduced evaporator investment."The wholemachine is reliable:the pump shaft has high strength,the bearing capacity is large,the bearingseat has a water-cooled sleeve,the shaft seal has a long service life,and the material perfor-mance is good,ensuring the long-term operation of a single pump.

Q.What kind of package do you provide? A.We provide export plywood packing for our products. Q.How many days does it take for manufacturing? A.It depends on order quantity and pump types.Normally it takes 30~120 days Q.What payment term do you prefer? A.Normally we take payment term 30%T/T in advance,70%paid before shipment.We can alsoaccept L/C at sight. Q.What materials do you use to make your pumps? A.We can use materials such as Ni-Hard alloy,1Cr18Ni9Ti,304L,CW-2,316L,904L,CD4MCu, MM-4,2507,double-phase steel series,J-1 alloy,JM3,JM6,Kazak B,C alloy,Monel alloy,Ti,Nialloy. Q.What is your warranty? A.We provide 12 months warranty after commissioning or 18 months after delivery whichevercomes first.

Product Description

Product Parameters

Company Profile

Certifications

Packaging & Shipping

FAQ